Family Owned & Operated Since 1971• Bakersfield, CA
Pipe and cable locators, leak detectors, and underground utility equipment
41 product families(129 total products)
A-Frame fault locator accessory for the Amprobe UAT-600 underground utilities locator series. Locates cable/wire ground faults, sheath faults, and pipeline coating defects with compass guidance and numeric fault field strength indicators.
The Amprobe AT-6010 Advanced Electrical Wire Tracer Kit comes with custom Amprobe soft carrying case, test leads and accessories.
Receiver, UAT-600 Series
Signal-clamp accessory for the Amprobe UAT-600 locator series — safely applies a locate signal to a cable by inducing it through the insulation into the wires or pipes, with no direct electrical contact. For low-impedance closed circuits; included with the UAT-620 kit.
The Amprobe AT-6010 Advanced Electrical Wire Tracer Kit comes with custom Amprobe soft carrying case, test leads and accessories.
Transmitter, UAT-600 Series
Transmitter unit for the Amprobe UAT-500 Series underground utility locating system — applies a trace signal to buried cables and metallic pipes for the UAT-500 receiver to follow.
The Amprobe AT-6010 Advanced Electrical Wire Tracer Kit comes with custom Amprobe soft carrying case, test leads and accessories.
Megger Easyloc Standard System — complete cable-location kit with the Easyloc RX Standard receiver and Easyloc TX transmitter. 33 kHz active mode plus passive radio (15–23 kHz) and power (50–250 Hz) frequencies for tracing cable runs and pipe networks. Push-button depth measurement: 0.3–5 m for cables, 0.3–7 m for sondes. Includes grounding set, ground stake, carry bag, and English user manual. IP56 receiver, IP54 transmitter, >40 hr battery operation.
Audio-guided magnetic locator for pinpointing ferrous objects — valve boxes, survey markers, manhole covers, well casings. One-handed 3-button operation, ~40-hour runtime on two 9V cells, 7-year warranty.
Metered version of the ML-1. Same one-handed form factor and controls, with an added LCD that shows signal strength, polarity (±), gain setting, and battery level — visual confirmation on top of the audio signal for harder-to-read targets.
Extended 55" version of the ML-3 with identical electronics, LCD meter, polarity, auto-zero, and IP68 construction. Longer pole for biggest sweep coverage and reduced operator fatigue on extended surveys — same sensitivity as the ML-3S, heavier (2.8 lb) in exchange for reach.
Next-generation 40" magnetic locator with LCD bar-graph meter, polarity indication, auto-zero, and digital tuning at 16.5 kHz. IP68 waterproof construction (submersible), ~40-hour runtime on three 9V cells, 1.8 lb. The maneuverable pick in the ML-3 series — choose for standard sweep height and easier one-handed work.
Mid-tier acoustic leak detector with backlit analog meter and a bank of 6 selectable band-pass filters (100/200/400 Hz low-side, 600/800/1200 Hz high-side) plus a Filter-Thru mode for 15 Hz–30 kHz full-spectrum listening. 62 dB amp, 110 dB hearing-protection limiter, 28 hr on 6× AA. Tunable analog filtering without digital complexity.
High-sensitivity acoustic leak detector built around a neodymium-magnet sensor (10 V/g) with dual-range filtering — high 30 Hz–5000 Hz for surveying, low 30 Hz–800 Hz for pinpointing, plus a 150–180 Hz notch. IP68 submersible sensor with 9.75 ft cable, 80-hour runtime on 4× C cells. SSI's pick when raw sensitivity and audio quality are the priorities.
Top-of-line pinpoint leak detector with automatic DSP noise reduction that filters out intermittent interference (passing vehicles, conversations, footsteps) no analog model can reject. Onboard memory stores up to 250 sound recordings with min-noise-level detection across multiple pipe locations. 10 selectable filters (5 high / 3 low / 2 notch for 50 & 60 Hz hum), IP67 piezo sensor. The right pick for noisy urban environments or when you need to document your findings.
Pinpoint acoustic leak detector with digital display, 900 V/G sensitivity, and eight selectable high-pass / low-pass bandpass combinations (100 Hz–5000 Hz range). Includes Android smart-phone app for location logging. Direct successor to the LD-16 on SSI's 2026 lineup.
Compact all-purpose acoustic leak detector — one handheld amplifier with three interchangeable attachments (three-point ground plate, magnetic base, contact rod) handles both survey sweeps and pinpointing. 100 Hz–1500 Hz, 56 dB amp, 2× AA cells for ~30 hr runtime, 8 lb total kit. The do-everything entry pick.
Rod-based survey listening instrument purpose-built for walking water distribution systems at hydrants, meters, and valves. Built-in A/C hum notch filter (transformers / power lines), 55 dB amplifier, 100 Hz–2000 Hz response, 3-range sensitivity, stereo leather-cup headphones. Ships with a short 4" rod and a 4-section 13" threaded rod set.
Direct successor to the PL-G on SSI's 2026 lineup. Fuji-engineered pipe and cable locator with simplified 3-mode operation — designed for crews who want reliable results without the VF series' multi-mode toolkit.
Pipe and cable locator with integrated GPS for data logging and mapping.
Receiver-only sonde finder for use with PL-VF transmitters.
Rechargeable receiver-only sonde finder for PL-VFR transmitters.
