Family Owned & Operated Since 1971• Bakersfield, CA
SKU: AT-6010-R
The Amprobe AT-6010 Advanced Electrical Wire Tracer Kit comes with custom Amprobe soft carrying case, test leads and accessories.
List price. Volume pricing available.
The Amprobe AT-6010 Advanced Electrical Wire Tracer Kit comes with custom Amprobe soft carrying case, test leads and accessories.
The Amprobe Receiver, AT-6010 Wire Tracer # AT-6010-R is manufactured by Amprobe. Valley Instrument Service is an authorized Amprobe dealer offering full sales support, NIST-traceable calibration, and expert technical assistance.
Our team can help with product selection, specs, pricing, and application support.
Contact Us or Call (661) 327-8681| Measurement category | CAT III 600 V |
| Operating voltage/current | 0 to 600 V |
| Operating frequency | Energized: 6.25 kHz |
| Hazardous voltage detection | N/A |
| Signal indications | Numeric bar graph display and audible beep |
| Response time | Tip Sensor (Energized/De-energized): 500 msBattery voltage monitoring: 5 sec |
| Current output of signal (typical) | N/A |
| Signal voltage output (nominal) | N/A |
| Range detection (open air) | Tip Sensor (Energized):Max distance via air: up to 20 ft (6.1 m)Pinpointing: approx. 1.97 in (5 cm)Tip Sensor (De-energized):Max distance via air: up to 14.7 ft (4.5 m)Pinpointing: approx. 1.97 in (5 cm) |
| Display size | LCD 2.5 in (6.35 cm) |
| Display dimensions (W x H) | 1.45 x 1.93 in(36.72 x 48.96 mm) |
| Display type | Segment LCD |
| Display color | Black and white |
| Booting time | < 3 sec |
| Backlight | Yes |
| Operating temperature | -4 °F to 122 °F (-20 °C to 50 °C) |
| Operating humidity | 45%: -4 °F to 95%: 50 °F to 75%: 86 °F to 45%: 104 °F to 122 °F (40 °C to 50 °C) |
| Storage temperature and humidity | -4 °F to 158 °F (-20 °C to 70 °C), <95% RH |
| Operating altitude | 0 to 6561 ft (2000 m) |
| Transient protection | N/A |
| Pollution degree | 2 |
| IP rating | IP 52 |
| Drop test | 3.28 ft (1 m) |
| Power consumption (typical) | 70 mA |
| Battery life | Approx. 25 h |
| Low battery indication | Yes |
| Fuse | N/A |
| Dimensions (L x W x H) | Approx. 7.2 x 2.95 x 1.69 in(183 x 75 x 43 mm) |
| Weight | Approx. 0.6 lb (0.27 kg) |
A-Frame fault locator accessory for the Amprobe UAT-600 underground utilities locator series. Locates cable/wire ground faults, sheath faults, and pipeline coating defects with compass guidance and numeric fault field strength indicators.
The Amprobe AT-6010 Advanced Electrical Wire Tracer Kit comes with custom Amprobe soft carrying case, test leads and accessories.
Receiver, UAT-600 Series
Signal-clamp accessory for the Amprobe UAT-600 locator series — safely applies a locate signal to a cable by inducing it through the insulation into the wires or pipes, with no direct electrical contact. For low-impedance closed circuits; included with the UAT-620 kit.