Family Owned & Operated Since 1971• Bakersfield, CA
Pressure, temperature, electrical, and multifunction calibrators
272 product families(52451 total products)
APM Advanced Pressure Module, 3,000 PSI
APMi intrinsically safe advanced pressure module, 10,000 PSI, for use with HPC50 and nVision
The Fluke 700PMP is a hand-operated pressure pump to provide pressures up to 150 psi/1000 kPa. Output fitting is 1/8 FNPT.
The Fluke 700PRV consists of two relief valves (1360 and 5450 psi) to be used with the 700HTP Hydraulic Test Pump.
Pneumatic Test Pump. -13 to 600 PSI
Extend the capabilities of Fluke Calibration 750 and 720 series calibrators with 750P pressure modules for gage, differential, and absolute pressure measurements.
Extend the capabilities of Fluke Calibration 750 and 720 series calibrators with 750P pressure modules for gage, differential, and absolute pressure measurements.
Extend the capabilities of Fluke Calibration 750 and 720 series calibrators with 750P pressure modules for gage, differential, and absolute pressure measurements.
Extend the capabilities of Fluke Calibration 750 and 720 series calibrators with 750P pressure modules for gage, differential, and absolute pressure measurements.
Extend the capabilities of Fluke Calibration 750 and 720 series calibrators with 750P pressure modules for gage, differential, and absolute pressure measurements.
Extend the capabilities of Fluke Calibration 750 and 720 series calibrators with 750P pressure modules for gage, differential, and absolute pressure measurements.
Extend the capabilities of Fluke Calibration 750 and 720 series calibrators with 750P pressure modules for gage, differential, and absolute pressure measurements.
Extend the capabilities of Fluke Calibration 750 and 720 series calibrators with 750P pressure modules for gage, differential, and absolute pressure measurements.
Extend the capabilities of Fluke Calibration 750 and 720 series calibrators with 750P pressure modules for gage, differential, and absolute pressure measurements.
Extend the capabilities of Fluke Calibration 750 and 720 series calibrators with 750P pressure modules for gage, differential, and absolute pressure measurements.
Replaceable Pressure Module, Absolute/0 to 30 PSI/0 to 200 kPa/0 to 2 Bar
Replaceable Pressure Module, Absolute/0 to 1000 PSI/0 to 7000 kPa/0 to 70 Bar
Loop Calibrator, 0.03%RD
Loop Calibrator, 0.01%RD
Multifunction Process Calibrator, ADT226, Temperature and Pressure
Multifunction Process Calibrator, ADT226EX, Temperature and Pressure, ATEX Certified Intrinsically Safe
Multifunction Process Calibrator, ADT226P, Temperature And Pressure, Panel Mount Configuration.
Dual Channel Handheld Reference Thermometer Readout
The Fluke 154 HART Communicator is a standalone tablet based tool that wirelessly connects to the HART transmitter. See the specs or talk with an engineer.
Very accurate current shunt to use for verification and calibration of process control loops.
Fluke Calibration 71XTrap Liquid-Dirt Trap Shields 718, 719 & 729 Pressure Calibrators from Moisture; Protects the Pump and Hose from Contamination
Fluke 725 handheld multifunction process calibrator. Sources and measures pressure (via any of 29 Fluke 700-series pressure modules), thermocouples, RTDs, mA, volts, ohms, and frequency — the single tool most process techs need to calibrate almost any process instrument. Dual display, mA source with 25 % step and automatic ramp, loop-power output, and switch-test mode make transmitter and switch calibration straightforward. Targeted at process plants, refineries, and pharmaceutical or food & beverage facilities where one technician covers a wide mix of instrumentation.
Fluke 726 precision handheld multifunction process calibrator. Covers the same broad I/O mix as the 725 — pressure (29 optional Fluke 700-series modules), thermocouples, RTDs, mA, volts, ohms, frequency — but with tighter accuracy (to 0.01 %) and 50,000-step resolution for reference-grade work. Stores up to eight user-configured multi-point calibration procedures for repeatable test sequences, and ships with PC connectivity for downloading results. Suited to metrology labs, pharmaceutical and semiconductor facilities, and any process environment where the 725 is not accurate enough for the loop being verified.
Fluke DPC/TRACK2 calibration-management software for Windows. Downloads and uploads procedures, results, and asset history between the 750-series Documenting Process Calibrators (753, 754) and a desktop database. Scales from a single-bench installation to networked, multi-user sites; produces paperless audit trails for ISO 9001, FDA, and other compliance frameworks.
ASC-400 Advanced Signal Calibrator
ASM-801 Advanced Signal Multi-Scanner
Process Calibration Deluxe Test Lead Kit
The Fluke 700PCK makes it possible to calibrate your pressure modules at your facility using your own precision pressure standards.
Pressure Controller 0 to 15000 PSI (0 to 1000 Bar), Pressure Modules Not Included
Pressure Controller 0 to 15000 PSI (0 to 1000 Bar) for Use with Water, Pressure Modules Not Included
Fluke 712B Handheld RTD Calibrator provides highly accurate, easy-to-use, single-function RTD temperature calibration. Measure & simulate 13 RTD types.
The Fluke Calibration 714B thermocouple calibrator measures and simulates 9 types of thermocouples, providing durable and reliable performance for process calibration.
Fluke 724 handheld temperature calibrator. Sources and measures thermocouples (J, K, T, E, R, S, B, L, U, N, C, XK, BP), RTDs (Pt100/200/500/1000, Ni120, Cu10), mA, volts, ohms, and frequency from a single tool. Dual display measures the TC or RTD input while simultaneously sourcing mA, so a transmitter can be verified in one pass — source the process variable, read the loop current. Suited to process plants, power generation, and instrumentation shops calibrating temperature transmitters, thermostats, and indicators in the field.
Maintenance Kit for ADT916 Generator
Maintenance Kit for ADT919 Generator
Maintenance Kit for ADT949 Generator
Maintenance Kit for ADT959 Generator
Hydraulic Ultra-High Pressure Test Pump, 60000 PSI (4200 Bar), Autoclave F-250-C, 9/16" -18 UNF Female
Hydraulic Jack Pump, 0 to 10,000 PSI (700 Bar), Oil Medium
GaugeCalHP Automated Pressure Gauge Calibration System, Up to 15,000 PSI
One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals.
Low-Pressure Test Pump, 100 PSI/7 Bar
Fastcalxp Automated Gauge and Transmitter Calibration Software
Imperial dual-column, dual piston/cylinder hydraulic deadweight tester. Side-by-side columns enable comparative calibrations and differential measurements; each model ships with both a low-range and a high-range piston up to 15,000 PSI. ±0.100% standard accuracy (±0.025% optional), NIST traceable. Configure pressure range, calibration data, pressure medium, and o-ring material to build your part number.
Top-of-line imperial Type T hydraulic deadweight tester at ±0.015% reading accuracy. Dual-column configuration with two interchangeable pistons (low + high range) and a dedicated weight set per piston, so high-range and low-range work proceed without reconfiguration. NIST traceable, local gravity correction + calibration data included. Configure pressure range, pressure medium, and o-ring material to build your part number.
Imperial single-column, dual piston/cylinder hydraulic deadweight tester for pressure calibration up to 15,000 PSI. Each model ships with two interchangeable pistons — a low-range piston for fine resolution and a high-range piston for top-pressure work. ±0.100% standard accuracy (±0.025% optional), NIST traceable. Configure pressure range, calibration data, pressure medium, and o-ring material to build your part number.
Imperial single-column, single-piston/cylinder hydraulic deadweight tester for pressure calibration up to 15,000 PSI. ±0.100% standard accuracy (±0.025% optional), NIST traceable. Configure pressure range, calibration data, pressure medium, and o-ring material to build your part number.
Imperial single-column, single-piston/cylinder hydraulic deadweight tester at ±0.015% reading accuracy — the highest accuracy class in the M&G imperial Type T DWT line. NIST traceable, local gravity correction + calibration data included. Available in five pressure ranges from 500 PSI to 15,000 PSI. Configure pressure range, pressure medium, and o-ring material to build your part number.
Metric dual-column, dual piston/cylinder hydraulic deadweight tester. Side-by-side columns enable comparative calibrations and differential measurements. ±0.100% standard accuracy (±0.025% optional via calibration upgrade). NIST traceable. 9 range models across kg/cm², bar, and kPa unit systems. Configure pressure range, calibration data, pressure medium, and o-ring material to build your part number.
Top-of-line metric Type T hydraulic deadweight tester at ±0.015% reading accuracy. Dual-column configuration with two interchangeable pistons (low + high range) and a dedicated weight set per piston so high-range and low-range work proceed without reconfiguration. NIST traceable, local gravity correction + calibration data included. Configure pressure range, pressure medium, and o-ring material to build your part number.
Metric single-column, dual piston/cylinder hydraulic deadweight tester. ±0.100% standard accuracy (±0.025% optional via calibration upgrade). Each model ships with two interchangeable pistons — a low-range and a high-range — so one tester covers a wide pressure span. NIST traceable. 9 range models across kg/cm², bar, and kPa unit systems. Configure pressure range, calibration data, pressure medium, and o-ring material to build your part number.
Metric single-column, single-piston/cylinder hydraulic deadweight tester at ±0.025% reading accuracy (standard). NIST traceable with full calibration data included in the base price. 20 range models across kg/cm², bar, and kPa unit systems, spanning 1 to 100,000 kPa (or equivalent in other units). Configure pressure range, gravity correction, pressure medium, and o-ring material to build your part number.
Metric single-column, single-piston/cylinder hydraulic deadweight tester at ±0.015% reading accuracy — highest accuracy class in the metric Type T DWT line. NIST traceable, local gravity correction + calibration data included. 18 range models (6 ranges × 3 unit systems: kg/cm², bar, kPa). Configure pressure range, pressure medium, and o-ring material to build your part number.
GaugeCalHP NPT Fitting Kit for Pressure Calibration
The Fluke 700HTH-1 hydraulic test hose is a 10,000 psi, 690 bar working pressure test hose that features stainless steel and nylon construction for use in connecting a Fluke-700HTP-1 or other hydraulic test pump to a unit under test.
Fluke 700M20TH premium pressure transmitter test hose with M20 × 1.5 metric connections. Stainless-steel braided hose, female M20 fittings on both ends, rated to 5,000 psi / 345 bar. Used to connect Fluke 700-series pressure calibrators to transmitters or pumps ported for the M20 × 1.5 standard common in European process installations.
Fluke 700MTH premium pressure transmitter test hose for metric connections. Stainless-steel braided construction with 1/4" female BSP fittings on both ends, rated to 5,000 psi / 345 bar. Use with Fluke 700-series pressure calibrators when the transmitter or pump under test has metric BSP threads instead of NPT.
Fluke 700TTH-10K premium pressure transmitter test hose. Stainless-steel braided hose with 1/8" NPT female fittings on both ends, rated to 10,000 psi / 690 bar working pressure — the 10K counterpart to the 700TTH-5K. Intended for high-pressure calibration work with the Fluke 700HTP-2 hand pump or equivalent, connecting the calibrator to a pressure transmitter or device under test.
Fluke 700TTH-5K premium pressure transmitter test hose. Stainless-steel braided hose with 1/8" NPT female fittings on both ends, rated to 5,000 psi / 345 bar working pressure. Connects Fluke 700G, 718/719, 721, 729, or 750-series pressure calibrators to a pressure transmitter or pump during field calibration.
Fluke 71X Hose Kit — replacement hose-and-fitting set for the Fluke 718 and 719 series handheld pressure calibrators. Includes a short and a long pressure hose plus the standard 1/8" NPT fittings needed to connect the calibrator to a pressure source or to a device under test. Ships as the OEM replacement when the kit originally bundled with the calibrator is lost or damaged.
The PRC10 enables plant maintenance and electrical technicians to test and calibrate a wide variety of process control equipment, including transmitters, transducers, indicators, sensors, instrumentation, robotic systems, thermocouples, and other industrial system components. Includes test leads, alligator clips, 100V-240V AC universal adaptor with 4 plugs, six AA batteries, and hard carrying case.
The Fluke 705 Loop Calibrator is a cost-effective, integrated solution for calibration, repair, & maintenance of milliamp loops. Get specs & details here.
The Fluke 707 Current Loop Calibrator delivers fast, one-handed, push-button loop checks. Get specs, reviews, & a free demo. Your solution awaits here.
Reduce time to measure voltage & power up a loop with official Fluke 709 Precision Loop Calibrator. See specs & accessories & get a free demo here.
Official Fluke 709H mA HART Loop Calibrator. Communicates with & Tests HART Smart Instruments. Best-in-Class Accuracy at 0.01% Reading. Get a Free Demo!
The Fluke 710 mA Loop Valve Tester calibration tool performs quick, easy tests on HART smart control valves. Get the specs & details. Your solution awaits here.
The Fluke 715 Volt/mA Loop Calibrator measures loop current (0-20 mA, 4-20 mA) signals with 0.01 % accuracy and 1 µA resolution. Get specs & free demo here.
Dual-sensor handheld calibrator with data logger. Configure with two pressure sensors (P1 + P2) — combinations of AI/DI/CI/CN ranges available. SKU is built at configuration.
Source 0.00 to 24.00 mA, read 0.00 to 52.00 mA (-25% to 300% range). Simulate and power 2-wire transmitters. Accuracy ±0.025% ±1 LSD; ±0.005 mA at 4 mA / 20 mA EZ-checks. NIST cert with data included.
4-20 mA Loop Calibrator with Rubber Boot, Test Leads and NIST Cert
Panel-Mount Multifunction Calibrator (PIE 820 Panel-Mount Variant)
Panel-Mount Multifunction Diagnostic Calibrator (PIE 830 Panel-Mount Variant)
Cal Kit, CX-04, 34L Cylinder CO 50 PPM in N2, Regulator, Cal Cup, Case & Tubing
Cal Kit, GP-1000, 34AL 50% CH4 in Air, Demand Flow Regulator, Case & Tubing
Cal Cap for GX-2001 and GX-2009
Cal Kit, HS-04, 34AL Cylinder H2S 25 PPM in N2, Regulator, Cal Cup, Case & Tubing
Cal Kit, NC-1000, 34AL Isobutane 500 PPM in Air, Demand Flow Regulator, Case & Tubing
Cal Kit, OX-04, 34AL Cylinder N2 100%, Regulator, Cal Cup, Case & Tubing
Cal Kit, Fixed for SD-1GP, 50% LEL H2 in Air 34L, for SD-1EC, 50 PPM CO in Air 34L, Regulator, 2 Cal Cups, Case & Tubing
O-RING,.489 ID X.070, Viton (For AL Regulators)
4 in 1 Transducer Adp Kit
Transducer 4-in-1
Transducer Kit 1000 ft-lb
Transducer Kit 150 in-lb
Transducer Kit 2000 ft-lb
