Family Owned & Operated Since 1971• Bakersfield, CA
Hand tools, test leads, protective cases, tube benders, and cable management
8518 products
Advanced-tier 10 kV insulation resistance tester for condition assessment on transformers, motors, switchgear, and cables in environments up to 230 kV. Supports IR, DAR, PI, DD, SV, ramp, and PDC (with software) for full diagnostic depth. Internal memory plus optional Bluetooth export to PowerDB or CertSuite for paperless reporting. PI Predictor for fast multi-asset testing; RE>Act mode monitors reabsorption current for safer measurements. CAT IV-rated with live circuit detection and locking terminals.
Eight-channel digital hydrometer kit for flooded lead-acid battery cells. Draw electrolyte into the probe and specific gravity (SG) and temperature are determined in 5 seconds. On-board memory for 8 tests × 256 cells each. Test data transfers to the included 8-channel data logger and imports directly into Megger Power DB for full battery condition reporting. Includes Anton Paar digital hydrometer, 8-channel data logger, custom carrying case, and software CD.
Pocket-sized digital/analogue insulation and continuity tester from Megger's MIT300 electrician's series — adds backlit display, switched SP4F test probe, adjustable continuity buzzer (1–20 Ω), 10 Ω – 1 MΩ resistance range, and insulation limit alarm. 250 / 500 / 1000 V insulation to 999 MΩ; 600 V AC/DC voltmeter. IP54 rugged case.
Intechangeable heads permit torquing capability with adjustable torque wrench bodies.
Intechangeable heads permit torquing capability with adjustable torque wrench bodies.
Provides accurate torque reading to validate torque instrument calibration. Two Modes of Operation: Track and Click.
Provides accurate torque reading to validate torque instrument calibration. Two Modes of Operation: Track and Click.
Intechangeable heads permit torquing capability with adjustable torque wrench bodies.
TRM50 Coaxial Feed-Through BNC Male to BNC Female Cable Terminator for ScopeMeter 190 Series Portable Oscilloscopes
Light-Check Adapter Kit US w/Carrying Case
Precision source for calibrating process devices and measuring DC process signals from 0 to 24mA or as mV in voltage ranges with a super large LCD that displays readings in mA, as a percent of the 0 to 24mA range or as mV in voltage ranges. Additional features include Touch Keypad and five stored calibration values for fast calibrations. Complete with 9V Battery, calibration cable with spade lug terminals, carrying case, neck strap, and AC Power Adapter.
A tachometer is a device that measures the angular speed of a rotating shaft in terms of revolutions per minute (RPM). The Extech 461750 Tachometer features surface wheels that measure contact surface speeds of rotating (10 to 19,999 RPM) and moving (3 to 6,560 ft./minute; 1 to 1999. 9 m/min) objects. Complete with 9V battery and surface wheels.
Perform tachometer RPM measurement, stroboscopic speed and motion analysis with the Extech 461825 Combination Photo Tachometer and Stroboscope. The unique display reverses character direction depending on which measurement mode you are using. The tachometer memory stores last, max, and min readings for recall. The strobe features course and fine flash rate adjustments in 3 ranges. It is complete with 4 AA batteries, reflective tape, and carrying case.
The Extech 461830 is a digital StroboTach tachometer. Freeze motion and analyze rotating objects without contact. Checks and analyzes motion and speed by simply aiming and synchronizing its flash rate (FPM) with a rotating object. Ideal for measuring the speed of moving gears, fans, pumps, motors and other equipment used in general maintenance, production, quality control, or laboratories. Complete with 6 ft power cord, handle and can be tripod mounted.
Uses visible light for non-contact measurements up to 6in. (150mm) from target. Comes with wheels for linear surface speed (0.2 to 6560 ft/m; 0.05 to 1999.9 m/m) or RPM measurements, 4 AA batteries, 23in. (0.6m) reflective tape, and carrying case.
The Extech 461937 is a set of spare Reflective Tape, coming in packs of 10. For use with any non-contact tachometer.
The Extech HDV700 is a versatile and lightweight professional videoscope that is designed for inspections in locations that are difficult or unsafe to access. With one or more of the eight waterproof (IP67) camera probes*, you can use the HDV700 for condition monitoring in manufacturing, HVAC/R, plumbing, building, and automotive applications. A range of small diameter and articulating camera probes are available to give you clear visibility of components from the 5-inch color touchscreen display. Easily maneuver the narrow probes into small openings without disassembling equipment. The HDV700 also features multiple data recording options so you can easily create reports at the job site by transferring images and videos to your laptop. *Sold separately, or as a kit (see related products section for additional probe options)
5" Videoscope Kit with HD 5.5mm x 1m Camera Probe
5" Videoscope Kit with Dual HD Camera 4.9mm x 1m Long Probe
5" Videoscope Kit with 2 Way Articulating 3.9mm x 1m Long Probe
5" Videoscope Kit with 4 Way Articulating 6.0mm x 1m Long Probe
5" Videoscope Kit with Plumbing Spool and 28mm x 30m Long Probe