Family Owned & Operated Since 1971• Bakersfield, CA
Flowmeters, level transmitters, level switches, and flow indicators
290 products
1/4″ NPT-18 male thread · 10…30 VDC
SNORKEL sanitary pressure and level transmitter, fixed range. Configured to order — base list price shown.
Small diameter submersible hydrostatic level transducer. Configured to order — base list price shown; specify range, cable length, output.
Complete liquid-level measurement system — a 316 stainless steel snubnose AMETEK submersible transmitter paired with a fully calibrated, microprocessor-based meter/controller in a NEMA 4X housing, plus factory-installed waterproof cable. Choose the sensor model (575, 575 PB, 675 PB, 375, SST, or SDT), meter output (two or four relays, optional 4–20 mA), and lightning protection. The specific sensor range is included at no charge and cable length is quoted separately. Configure sensor, output, and lightning protection.
Cost-effective submersible level transmitter for tanks, wells, and wastewater. 4–20 mA or 1–5 VDC output, ranges 0–6 to 0–300 PSI (to ~692 ft of water), 316L stainless steel diaphragm, a Delrin or stainless snubnose or flush sensing port, and vented polyurethane cable with a Viton seal. Cable length is specified separately. Configure sensing port, output, range, and electrical connection.
Submersible pressure transmitter for liquid-level measurement in tanks, wells, sumps, and wastewater. 12–28 VDC / 4–20 mA output, ranges 0–6 to 0–300 PSI (to ~692 ft of water), with a choice of snubnose, stainless snubnose, or protected flush-cage sensing port; 316 stainless steel or Hastelloy C diaphragm; and polyurethane or Teflon cable. NSF-certified and CSA intrinsically safe versions available. Cable length is specified separately. Configure sensing port, range, electrical connection, diaphragm, and fill.
Shark Cage submersible level transmitter — a rugged flush-diaphragm sensor inside a protective cage for debris-laden or high-flow service such as lift stations, storm water, and industrial sumps. CSA intrinsically safe. 12–28 VDC / 4–20 mA output, ranges 0–6 to 0–60 PSI, 316 stainless steel diaphragm, and vented polyurethane or Teflon cable. Cable length is specified separately. Configure pressure range and electrical connection.
Digital meter/controller for AMETEK submersible level transmitters — a fully calibrated, microprocessor-based display with relays and optional analog retransmission. 110/220 VAC or 12/24 VDC input; display-only or two/four relays; optional 4–20 mA analog output; panel-mount or NEMA 4X weathertight housing; and optional lightning/surge protection on the signal and power lines. The engineering units shown and the paired transmitter model are specified at order. Configure power input, output, housing, and lightning protection.
Low-cost submersible level transducer for OEM and general level measurement. Wide choice of 4–20 mA or VDC outputs (including ratiometric), ranges 0–1 to 0–150 PSI, 316L stainless steel diaphragm, a Delrin or stainless snubnose, and vented polyurethane, polyolefin, or Teflon cable with a Viton seal. Optional on-board temperature output. Cable length is specified separately. Configure sensing port, output, range, electrical connection, and temperature option.
Slim-line submersible level transmitter — a narrow 0.75 in body for 1 in wells, piezometers, and tight boreholes. 11–30 VDC / 4–20 mA output, ranges 0–15 to 0–150 PSI (to ~346 ft of water), 316L stainless steel diaphragm, Delrin snubnose, and vented polyurethane cable with a Viton grommet. Cable length is specified separately. Select the pressure range; the remaining configuration is standard.
Intelligent sanitary silo and tank level transmitter. Configured to order — base list price shown.
Intelligent sanitary pressure and level transmitter. Configured to order — base list price shown.
Submersible hydrostatic level transducer. PUR cable base price shown; water-block PVC and FEP cable versions available. Configured to order.
Cage-protected submersible hydrostatic level transducer. PUR cable base price shown; FEP cable version available. Configured to order.
Intrinsically safe submersible hydrostatic level transducer for hazardous locations. Configured to order — base list price shown.
G 1/2″ · NO/NC, NPN · Connector, M12 × 1
G 1/2″ · NO/NC, PNP · Connector, M12 × 1
54 x 20.3 x 5.5 mm, QF5.5 · 10 mm · NO contact, NPN · Cable
54 x 20.3 x 5.5 mm, QF5.5 · 10 mm · NO contact, NPN · Cable
54 x 20.3 x 5.5 mm, QF5.5 · 10 mm · NO contact, NPN · Cable
54 x 20.3 x 5.5 mm, QF5.5 · 10 mm · NO contact, PNP · Cable
54 x 20.3 x 5.5 mm, QF5.5 · 10 mm · NO contact, PNP · Cable
54 x 20.3 x 5.5 mm, QF5.5 · 10 mm · NO contact, PNP · Cable
54 x 20.3 x 5.5 mm, QF5.5 · 10 mm · NC contact, NPN · Cable