Family Owned & Operated Since 1971• Bakersfield, CA
Pipe and cable locators, leak detectors, and underground utility equipment
129 products
Enigma 3 Standard Loggers kit — 3 standard acoustic loggers plus data transfer case. Deploy under hydrant caps or on service connections to correlate overnight leak activity across a water main.
LC-5000 leak correlator with 2 pre-amplifiers — acoustic leak-location correlation system for water mains.
Mid-tier acoustic leak detector with backlit analog meter and a bank of 6 selectable band-pass filters (100/200/400 Hz low-side, 600/800/1200 Hz high-side) plus a Filter-Thru mode for 15 Hz–30 kHz full-spectrum listening. 62 dB amp, 110 dB hearing-protection limiter, 28 hr on 6× AA. Tunable analog filtering without digital complexity.
Top-of-line pinpoint leak detector with automatic DSP noise reduction that filters out intermittent interference (passing vehicles, conversations, footsteps) no analog model can reject. Onboard memory stores up to 250 sound recordings with min-noise-level detection across multiple pipe locations. 10 selectable filters (5 high / 3 low / 2 notch for 50 & 60 Hz hum), IP67 piezo sensor. The right pick for noisy urban environments or when you need to document your findings.
Audio-guided magnetic locator for pinpointing ferrous objects — valve boxes, survey markers, manhole covers, well casings. One-handed 3-button operation, ~40-hour runtime on two 9V cells, 7-year warranty.
Cable height meter for measuring overhead conductor clearance — 35 ft maximum height, calibrated for telecom-cable installations.
Megger Easyloc Standard System — complete cable-location kit with the Easyloc RX Standard receiver and Easyloc TX transmitter. 33 kHz active mode plus passive radio (15–23 kHz) and power (50–250 Hz) frequencies for tracing cable runs and pipe networks. Push-button depth measurement: 0.3–5 m for cables, 0.3–7 m for sondes. Includes grounding set, ground stake, carry bag, and English user manual. IP56 receiver, IP54 transmitter, >40 hr battery operation.
Rod-based survey listening instrument purpose-built for walking water distribution systems at hydrants, meters, and valves. Built-in A/C hum notch filter (transformers / power lines), 55 dB amplifier, 100 Hz–2000 Hz response, 3-range sensitivity, stereo leather-cup headphones. Ships with a short 4" rod and a 4-section 13" threaded rod set.
High-sensitivity acoustic leak detector built around a neodymium-magnet sensor (10 V/g) with dual-range filtering — high 30 Hz–5000 Hz for surveying, low 30 Hz–800 Hz for pinpointing, plus a 150–180 Hz notch. IP68 submersible sensor with 9.75 ft cable, 80-hour runtime on 4× C cells. SSI's pick when raw sensitivity and audio quality are the priorities.
Compact all-purpose acoustic leak detector — one handheld amplifier with three interchangeable attachments (three-point ground plate, magnetic base, contact rod) handles both survey sweeps and pinpointing. 100 Hz–1500 Hz, 56 dB amp, 2× AA cells for ~30 hr runtime, 8 lb total kit. The do-everything entry pick.
Extended 55" version of the ML-3 with identical electronics, LCD meter, polarity, auto-zero, and IP68 construction. Longer pole for biggest sweep coverage and reduced operator fatigue on extended surveys — same sensitivity as the ML-3S, heavier (2.8 lb) in exchange for reach.
Next-generation 40" magnetic locator with LCD bar-graph meter, polarity indication, auto-zero, and digital tuning at 16.5 kHz. IP68 waterproof construction (submersible), ~40-hour runtime on three 9V cells, 1.8 lb. The maneuverable pick in the ML-3 series — choose for standard sweep height and easier one-handed work.
Lithium-ion rechargeable version of the PL-VF10. Identical 10W locating capability with 10.8 V / 10 Ah Li-ion transmitter pack — 2 lb lighter than the alkaline-powered PL-VF10 (6 lb vs 8 lb) on top of the recharge-cycle savings. Receiver 30 hr continuous runtime on its own Li-ion.
Lithium-ion rechargeable version of the PL-VF3. Identical locating capability — same 5 frequencies, 8 modes, 3W transmitter, dual-antenna depth, 400 m wireless remote — swapping alkaline cells for 84 Wh (TX) and 55.5 Wh (RX) Li-ion packs. 30 hr receiver runtime, 8–12 hr transmitter.
The Amprobe UAT-505 Underground Utility Locator Kit locates buried wires, cables, and pipes. This base kit, without a signal clamp, pairs the UAT-600-R receiver with the 33 kHz UAT-500-T transmitter and includes the TL-UAT-500 test leads, batteries, a user manual, and the CC-UAT-500 carrying case.
Bore Hole Gradiometer complete kit — includes electronics and sensor. Cable ordered separately.
Rod-based acoustic listening instrument for pinpointing water leaks at hydrants, meters, and valves. Lightweight, portable, and calibration-free — no batteries or cables required. Stainless-steel rod with a resonant chamber head delivers exceptional amplification of subsurface sounds. 1-meter length — the compact option for routine service calls.
Magnetic Underwater Locator complete kit — includes electronics and sensor. Cable ordered separately.
Direct successor to the PL-G on SSI's 2026 lineup. Fuji-engineered pipe and cable locator with simplified 3-mode operation — designed for crews who want reliable results without the VF series' multi-mode toolkit.
Rugged dual-purpose locator — pipe/cable tracing AND magnetic ferrous-object location in one tool. Four standard active frequencies (815 Hz, 8 kHz, 33 kHz, 82 kHz; customizable 12 Hz–200 kHz), simultaneous 2-frequency transmission, peak + left/right antenna modes, and digital depth with triangulation. The budget, rugged workhorse of the PL line.
Flagship 10W transmitter version with 8 standard active frequencies (adds 815 Hz, 65 kHz, 480 kHz) and 12 total receiver-side. More transmitter power couples signal through high-impedance targets and long cable runs; additional frequencies handle congested utility environments where the VF3 runs out of options. Same 1"–30 ft digital depth, peak/null modes, and directional display as the VF3.
Mid-range 3W multi-frequency pipe and cable locator with 5 standard active frequencies (512 Hz / 8 kHz / 33 kHz / 82 kHz / 200 kHz) and 8 locating modes. Simultaneous peak/null dual-antenna display, pin-point peak, directional arrows, 1"–30 ft digital depth (±5%), auto-impedance transmitter (5 Ω–25 kΩ), 400 m wireless remote control. The everyday workhorse for typical utility jobs.
A-Frame fault locator accessory for the Amprobe UAT-600 underground utilities locator series. Locates cable/wire ground faults, sheath faults, and pipeline coating defects with compass guidance and numeric fault field strength indicators.
The Amprobe AT-6010 Advanced Electrical Wire Tracer Kit comes with custom Amprobe soft carrying case, test leads and accessories.