Family Owned & Operated Since 1971• Bakersfield, CA
Industrial scales, load cells, indicators, test weights, and force gauges
8971 products
Stainless steel weights designed to meet NIST Handbook 44 and ASTM E617-23 • Class 5 tolerances • Sealing cavity for adjustment for most weights • Serial numbers may be stamped on weights (option) • Nominal value marked on weights
OIML E1, E2, F1 and F2 polish finish • OIML M1 and M2 satin finish • Density for E1/E2 is 7.95 g/cm3 (unless otherwise noted, 1 mg, 2 mg and 5 mg are aluminum, and density is 2.7 g/cm3) • Density for F1/F2/M1/M2 is 7.84 g/cm3 (unless otherwise noted, 1 mg, 2 mg and 5 mg density is 2.7 g/cm3, 10 mg to 500 mg density is 7.95 g/cm3) • E1 and E2 are supplied with Accredited Certificate per OIML R111 • E1, E2, F1, F2 and M1 weights include protective case
E1, E2, F1, F2 and M1 weights include protective case • OIML E1, E2, F1 and F2 polish finish • Density is approximately 7.95 g/cm3 • Nominal value is marked on weight and sold as individual part • Weights manufactured international recommendation, OIML R111 specifications
E1, E2, F1, F2 and M1 weights include protective case • OIML E1, E2, F1 and F2 polish finish • Density is approximately 7.95 g/cm3 • Nominal value is marked on weight and sold as individual part • Weights manufactured international recommendation, OIML R111 specifications
With NEMA Type 4X, stainless steel enclosure and advanced gasket system, the industrial-strength Legend Series is built for dirty, wet environments and demanding workplaces, inside or out. Choose between large, ultra-bright LED or LCD 0.8-inch displays with 6-digits and sharp contrast for superior display visibility. • LED display (480) • LCD backlit display (482) • Time and date, battery backed • Local/remote operation • Numeric keypad (480 Plus/482 Plus) • Keyed entries for setpoint values (480 Plus/482 Plus) • Two independent serial ports • NEMA Type 4X/IP66 stainless steel washdown enclosure • Programmable ticket formats for gross, net, accumulator and setpoints • Five continuous stream formats • Adapter filter or rolling average filter • Operator functions through menu for audit trail, preset tare, unit ID, accumulator, time and date, setpoints, communications and print formats • Eight setpoints, sequenced batch engine • Configurable with Revolution software
Nominal value marked on weights • Cavity for adjustment
The EZ Mount 1 HE Series weigh module utilizes the double-ended beam design with an articulating top plate to provide superior accuracy in any loading condition. The double-ended beam design means there is less cumbersome hardware and each module has a lower profile than modules of different configurations. The RL72019SS Series load cells give you accuracy and dependability in any environment. Their stainless steel, hermetically sealed design also make them the ideal solution in harsh environments where moisture is present. • Three or four EZ Mount 1 stainless steel compression mounts with RL72019SS welded-seal stainless steel double-ended shear beam load cells • One JB4SS NEMA Type 4X stainless steel signal trim junction box • 25 ft of hostile environment EL147HE SURVIVOR load cell cable
Mild steel • One jam nut included with each eye bolt
Load Ranger weigh pads are portable vehicle weighing scales ideal for mobile and temporary applications. They offer an adaptable solution for vehicle weighing. With unmatched accuracy, Load Ranger weigh pads capture wheel or axle weights, either individually or in sets of up to 14 pads. • Up to 16 individual pads communicate wireless to the indicator • Industrial RF radio module to communicate with optional indicator • Integrated wheels and nonslip rubber under platform • Internal rechargeable battery with 40 hours of battery life • Built-in indicator on each scale with 1 in character display • IP67 rating • Cover plate protects built-in indicator
4.6 micron thermal transfer wax/resin ribbon • Smudge and scratch resistant • 1,182 ft (360.3 m) long (one ribbon prints two rolls of 8 in (203.2 mm) OD label or tag stock) • Avoid exposure to heat, humidity and sunlight during storage
Off-center loading design for durable platform mounting • Potted and unpotted options available • NTEP certified from 10 to 50 kg • Capacities ranging from 3 to 90 kg • IP67 potted / IP65 unpotted seal ratings • Anodized aluminum construction
Nickel-plated high-alloy steel construction • Built-in lightning protection • IP67 sealed design • 3 mV/V output • Available in 10,000 to 125,000 lb capacities • FM approved and NTEP certified
The RLC self-aligning silo mount, together with the RLC load cell family, are an ideal solution for process control, batch weighing, silo/hopper and belt scale applications. The RLC mount incorporates a removable rocker pin design, that uses hardened stainless steel components on all load-bearing surfaces. The fully stainless steel construction guarantees long-term reliability, even in harsh environments. • Three or four RLC stainless steel compression mounts with RLC NTEP Certified stainless steel hermetically sealed compression disk load cells • One JB4SS NEMA Type 4X stainless steel signal trim junction box • 25 ft of hostile environment EL147HE SURVIVOR load cell cable
Designed for use in truck scale applications to prevent spillover into the pit • Impact, tear and weather-resistant SBR rubber • Web thickness 0.25 in • Available by the foot: 10 ft, 11 ft, 70 ft, 80 ft and 100 ft lengths • Maximum continuous length is 450 ft
Alloy steel construction with nickel plating • Environmentally sealed with stainless steel side plates • Single-ended shear beam design for low-profile floor scales • Capacities ranging from 250 to 20,000 lb • NTEP and FM certified • Threaded loading hole for secure mounting
Large, high-end, 7 in color touchscreen TFT display in 16:9 format • Fast stabilization time • Modular design • User-configurable and custom designed to meet changing applications • Meets advanced Pharma compliance including user/password management for security, audit trail function logs and integrated alibi memory • RS-232 and USB communication • Choice of display • Underweigh hook
State-of-the-art, TFT touchscreen operation • Fast stabilization time • Modular design • User-configurable and custom designed to meet changing applications • Meets advanced Pharma compliance including user/password management for security, audit trail function logs and integrated alibi memory • RS-232 and USB communication • Underweigh hook
OIML E1, E2, F1 and F2 polish finish • OIML M1 and M2 satin finish • Density for E1/E2 is 7.95 g/cm3 (unless otherwise noted, 1 mg, 2 mg and 5 mg are aluminum, and density is 2.7 g/cm3) • Density for F1/F2/M1/M2 is 7.84 g/cm3 (unless otherwise noted, 1 mg, 2 mg and 5 mg density is 2.7 g/cm3, 10 mg to 500 mg density is 7.95 g/cm3) • E1 and E2 are supplied with Accredited Certificate per OIML R111 • E1, E2, F1, F2 and M1 weights include protective case
Stainless steel polished finish • Designed to meet ASTM E617-23 specifications • Nominal value marked on weights • Serial numbers applied to case (weights may be marked with symbol) • Density 7.95 g/cm3
Stainless steel polished finish • Designed to meet ASTM E617-23 specifications • Nominal value marked on weights • Serial numbers applied to case (weights may be marked with symbol) • Density 7.95 g/cm3
Stainless steel polished finish • Designed to meet ASTM E617-23 specifications • Nominal value marked on weights • Serial numbers applied to case (weights may be marked with symbol) • Density 7.95 g/cm3
Stainless steel polished finish • Designed to meet ASTM E617-23 specifications • Nominal value marked on weights • Serial numbers applied to case (weights may be marked with symbol) • Density 7.95 g/cm3
Rice Lake’s configurable 680 Synergy Series indicator combines powerful features found in advanced instrumentation with easy-to-use functions of more basic indicators. Designed with the customer in mind, the 680 is suitable for real-world, industrial environments. Tackle general purpose weighing, straightforward automation and a wide range of applications with the 680 Synergy Series. • LED display • Battery backed time and date • Full numeric keypad • Multiple communication ports • 20 setpoint, 22 configurable types • Numeric keyed entry for tare and setpoint entry • Formattable tickets • Four onboard configurable digital I/O points, TTL logic • Built-in batch presets • Local/remote
Protects kiosk from vehicle traffic • Swings away freely and returns to center position • Universal mount accommodates a wide variety of kiosks • Includes mounting pole and base stand • Adjustable vertical and horizontal mounting