Kit, Stacking Cone, 25K LC, bearing plate and hardware.

Kit, OnBoard, Sandshoe Load cell (181895), Sand Shoe WLDT (215132), Hardware, No cable assembly

The sand shoe load cell kit is a conversion for common semi-trailer landing gear. A pair of load cells with a 2-in diameter and 20,000 lb capacity install in place of the original sand shoe pins. Complimenting sand shoes are included to distribute the force to the load cells properly. • Two 2-in, 20,000 lb load cell pins • Two sand shoes • Four load distribution spacers • Two bolts for anti-rotation of load cell

Kit, PL9110-10K Load Cell PL9110-10K, Bearing Plate, and Hardware

The Pl9110 double-ended shear beam load cell is ideal for weighing equipment that is typically fixed to a truck body. This has a single-piece bearing plate, which offers both a low profile and rigid mounting. With capacities from 2,000 lb to 20,000 lb, the PL9110 is easy to integrate on any type of equipment. • PL9110 stainless steel load cell • Bearing plate (mild steel) • Load cell bolts and spherical washers • Upper mount bolts and flat washers

Load Cell Kit, Kingpin Plate Includes 26 inch Underbody Load Cell, Kingpin Base Plate and Hardware

The PL9000-26 is a double-ended shear beam load cell that is ideal for distributing weight of the king pin plate to the trailer frame. With a capacity of 20,000 lb per module, these load cells can withstand rough roads. • Two PL9000-26 load cells • Two bearing plates (mild steel) • Two 30 ft cables with connectors • Load cell bolts and flat washers • Upper mount bolts and flat washers

Load Cell, Bending Beam PL9000-50 0.25 mV/V@12,500 LB 350 Ohm