AccuTrace Cable Route Tracer

The Megger 656621 AccuTrace cable route tracer is a cable tracer for locating, tracing, and measuring the depth of energized electrical cables. The tracer includes a transmitter and separate receiver. The transmitter sends an energized signal down a line either by magnetic induction, which does not require direct contact with the cable, or through a direct conductive connection. Signal strength and proximity to the cable are indicated visually on the receiver or audibly. The audible indicator has adjustable volume that can be set loud enough to hear without headphones. The tracer has a range of 1.5m to 5km (5 ft. to 3 mi.) and can locate cables buried up to 9m (30 ft.) deep. The unit can use both peak- and null-tracing modes on the same trace for increased speed and accuracy. The receiver handle telescopes closed for easy storage. The 656621 is commonly used by electricians and utility workers.

Determine line depth quickly by using the swivel mounted antenna. By adding the ring clamp (optional) can provide much stronger inductive signals to trace areas that have heavy cables. Water pipe blockages can be located by using water tight capsule transmitter (optional). A tape on transmitter allows for collapsed duct work locating.

Key Features

• Null and peak tracing capabilities
• Traces & determines depth for all conductive lines
• Traces de-energized or energized lines with conductive or inductive coupling
• Lightweight receiver
• Super-inductive circuitry enables (with inductive mode) you to trace much longer cable lengths than any competitor.
• Static and electric noise filtering
• Loud and adjustable audio output requires no headphones

The Megger AccuTrace Cable Route Tracer # 656621 is manufactured by Megger. Valley Instrument Service is an authorized Megger dealer offering full sales support, NIST-traceable calibration, and expert technical assistance.