Family Owned & Operated Since 1971• Bakersfield, CA
Controllers, transmitters, signal conditioners, HART communicators, and PLCs
9874 products
Isolated RS232 HART Modem
mobiLink Modem for Foundation Fieldbus and HART
mobiLink Modem for HART
mobiLink Modem for Foundation Fieldbus, Profibus Pa, and HART
mobiLink Modem for Profibus Pa and HART
Complete liquid-level measurement system — a 316 stainless steel snubnose AMETEK submersible transmitter paired with a fully calibrated, microprocessor-based meter/controller in a NEMA 4X housing, plus factory-installed waterproof cable. Choose the sensor model (575, 575 PB, 675 PB, 375, SST, or SDT), meter output (two or four relays, optional 4–20 mA), and lightning protection. The specific sensor range is included at no charge and cable length is quoted separately. Configure sensor, output, and lightning protection.
AMETEK’s Model 40 is a fully pneumatic indicating pressure controller, transmitter, and pilot positioner for control loops in refineries, chemical plants, and other process or hazardous areas where no electrical power is available. Built to specification: control mode (100% / 200% proportional, proportional + reset, 300% PID, or 75% pilot positioner); output (3–15, 3–27, 6–30, or 12–60 PSI); instrument type (controller, control with 2-position bypass, transmitter, or pilot positioner); sensing element (Bourdon tube, metal or slack diaphragm, Barton 199/224 DP cell, or indicating level); element material (bronze, 316 stainless steel, Ni-Span C, or Buna-N); pressure range to 3000 PSI; engineering units; and options such as external set point, air filter regulator, shatterproof glass, vented case, special calibration, and mounting brackets. Because each Model 40 is assembled to order from calibrated modules and elements, pricing is by quotation — contact us with your control requirements and we will configure and quote your unit.
All-welded 316 stainless steel fixed-range pressure transmitter — durable, accurate, and cost-effective for tough environmental and corrosive-media service. 4–20 mA (or low-power 1–5 VDC) output, ±0.3% full scale (±0.5% on the differential version). Gauge, absolute, compound, vacuum, or differential, from 6 PSI to 5000 PSI (6–500 psid differential). Weatherproof against direct spray to 200 PSI. Configure connection, type, range, output, fill, and cable to build your part number.
FM and CSA explosion-proof and intrinsically safe pressure transmitter with a bench-adjustable 5:1 zero/span turndown and a double-O-ring, clean-in-place weatherproof design. 4–20 mA output, ±0.25% of calibrated span, 316 stainless steel construction (Hastelloy C flush diaphragm for viscous or solids-bearing media), NACE-compliant. Ranges 3 PSI to 5000 PSI. Used in refineries, pipelines, petrochemical plants, pulp & paper, and water/wastewater. Configure connection, type, range, output, diaphragm, fill, approval, and coupling.
Welded 316 stainless steel hazardous-location pressure transmitter with a 4–20 mA output and ±0.25% of calibrated span accuracy (linearity, hysteresis, repeatability). FM and CSA explosion-proof and intrinsically safe, NACE-compliant, with a 5:1 field-adjustable zero/span turndown. Calibrated range bands from 3 PSI to 5000 PSI. Configure range band, wetted material, and output to build your part number.
Flush-mount hazardous-location pressure transmitter — the diaphragm sits flush with the process connection to prevent particulate buildup, making it suited to viscous or solids-bearing media. 316 stainless steel housing with a Hastelloy C diaphragm, 4–20 mA output, ±0.25% of calibrated span. FM and CSA explosion-proof and intrinsically safe. Calibrated range bands from 3 PSI to 300 PSI. Configure range, fill material, agency approval, and coupling.
Compact industrial and OEM pressure transducer with a 0–100 mV analog output (10 VDC excitation) and a 316 stainless steel isolation diaphragm — accurate to better than ±0.3% of full scale. Gauge, compound, or absolute; ranges from 0–1 PSI to 0–3000 PSI; 1/8 in or 1/4 in NPT with an 18 in cable or Packard connector (non-isolated brass option for clean, dry media). Configure type, range, and connections to build your part number.
Digitally compensated industrial pressure transducer offered with a wide choice of outputs — 4–20 mA or 1–6 / 1–5 / 0.5–4.5 / 0–5 VDC — and accuracy better than ±0.3% full scale over pressure (±1.0% over the full compensated temperature range). Gauge, compound, vacuum, absolute, or static-pressure types; ranges from 0–1 PSI to 0–3000 PSI; 316 stainless steel or brass process connection with cable, conduit, DIN, or Packard termination, plus an optional on-board temperature output. Configure type, range, output, and connections to build your part number.
Digital meter/controller for AMETEK submersible level transmitters — a fully calibrated, microprocessor-based display with relays and optional analog retransmission. 110/220 VAC or 12/24 VDC input; display-only or two/four relays; optional 4–20 mA analog output; panel-mount or NEMA 4X weathertight housing; and optional lightning/surge protection on the signal and power lines. The engineering units shown and the paired transmitter model are specified at order. Configure power input, output, housing, and lightning protection.
Compact intrinsically safe pressure transmitter for hazardous-area measurement — chemical and petrochemical manufacturing, control skids, and oil & gas wellheads. Stainless steel isolation diaphragm (Monel or Hastelloy optional) in a 316 stainless steel housing, ±0.2% FS (BFSL) typical, with a wide choice of 4–20 mA or VDC outputs. FM (US/Canada), ATEX (Dekra), and IECEx approved. Ranges from 0–1 PSI to 0–5000 PSI (0–0.07 to 0–340 bar). Configure protection, output, connection, and pressure to build your part number.
Rugged, compact general-purpose pressure transducer with a 1–6 VDC output (8–15 VDC excitation) and 316 stainless steel wetted parts — accurate to ±0.25% BFSL, with 3× burst pressure and an IP-64 rating. It ships fully compensated for pressure and temperature and is interchangeable without recalibration, with a standard Packard connector. Gauge, sealed, compound, vacuum, or absolute; ranges from 0–10 PSI to 0–5000 PSI. Configure type and range to build your part number.
The Fluke 154 HART Communicator is a standalone tablet based tool that wirelessly connects to the HART transmitter. See the specs or talk with an engineer.
The Fluke 3540 FC Three-Phase Power Monitor measures critical parameters on three-phase systems and wirelessly streams data to the Fluke Connect Cloud. You can access and track data as well as receive alarms to a mobile device or PC through Fluke Connect Condition Monitoring software.
Official Fluke 709H mA HART Loop Calibrator. Communicates with & Tests HART Smart Instruments. Best-in-Class Accuracy at 0.01% Reading. Get a Free Demo!
The Fluke 710 mA Loop Valve Tester calibration tool performs quick, easy tests on HART smart control valves. Get the specs & details. Your solution awaits here.
Low Cost Sensor / Transmitter for H2S or CO, Non Explosion Proof
Attachable loop powered digital indicator for 4-20 mA transmitters. Configured to order — base list price shown.
Compact Smart System intelligent digital indicator. Configured to order — base list price shown.
Smart System intelligent digital indicator, dual display, thermocouple/RTD/process inputs. Configured to order — base list price shown.