Pressure Instruments

Sintered Snubber Replacement Disc, Option A

Replacement sintered disc for NOSHOK sintered pressure snubbers, option A (2 micron, gases).

1/8" Male NPT x Male Quick-Test Fitting with Cap

1/8" Male NPT x Male Quick-Test Fitting with Cap

Ralston Liquid Trap with Male Quick-Test Top Port, Female Quick-Test Bottom Port

Liquid Trap with Male Quick-Test Top Port, Female Quick-Test Bottom Port

Swivel Gauge Adaptor, 1/4" NPT Male x 1/4" NPT Female, 316 SS

Swivel gauge adaptor, 1/4" NPT Male x 1/4" NPT Female, 316 stainless steel.

Overpressure Protectors

Overpressure protectors — 316 stainless steel, 1/2 in NPT male in / female out — automatically block the gauge when pressure exceeds a preset cutoff and reopen when it returns to range, protecting the gauge from spikes and surges. Setpoint bands from 10–29 PSI up to 725–3,625 PSI.

Pressure Snubbers

Pressure snubbers in brass or 316 stainless steel, 1/4 and 1/2 in NPT, rated to 5,000 PSI — dampen pulsation and pressure spikes to extend gauge life. Porosity selected for gas, liquid, or heavy-oil service. Specify material, connection, and application.

Sta-Kool Cooling Element

Sta-Kool cooling element — 316L stainless steel, 1/2 in F × 1/2 in M, reduces process-media temperature (up to ~750 °F) at the gauge socket so a standard process gauge can be direct-mounted to hot service without a siphon. Rated to 5,000 PSI.

Crystal Fastcalxp Gauge & Transmitter Calibration Software

Fastcalxp Automated Gauge and Transmitter Calibration Software

HD700 Manometer with Software, 2 PSI

Offering 11 selectable units of measure, the HD700 Differential Pressure Manometer can serve as a low range/high resolution Gauge or provide Differential Pressure up to 0 to 55.40 in. H2O (inches of water). Max/Min recording and Relative time stamp are useful features, as are HD700's Data Hold and Auto Power Off functions. The 2psi HD700 also features Zero function for offset correction or measurement and a built-in USB interface. Comes complete with 9V battery, software with USB cable, AC Adaptor, connection hose, built-in stand, and hard carrying case.

HD750 Manometer with Software, 5 PSI

Offering 11 selectable units of measure, the HD750 Differential Pressure Manometer can serve as a low range/high resolution Gauge or provide Differential Pressure up to 0 to 138.3 in. H2O (inches of water). Max/Min recording and Relative time stamp are useful features, as are HD750's Data Hold and Auto Power Off functions. The 5psi HD750 also features Zero function for offset correction or measurement and a built-in USB interface. Comes complete with 9V battery, software with USB cable, AC Adaptor, connection hose, built-in stand, and hard carrying case.

AC87 Test Lead Accessory Bus Bar Clip

Test Lead Accessory Bus Bar Clip

Quick-Test Hose, 6900 PSI / 475 Bar, 3 ft (1 M)

Quick-Test Hose, 6900 PSI / 475 Bar, 3 ft (1 M)

Union Body, 15/16-20 UNEF Male x 1/4" NPT Female

Union body, 15/16-20 UNEF male to 1/4" NPT female, for Type T deadweight tester test connections.

4 inH2O to PSI Conversion Ring for PK II DWT (Small)

Conversion ring for PK II pneumatic deadweight tester — converts 4 inH2O range to PSI. Small weight-carrier interface.

PK II Individual Weight, 0.1 PSI, Aluminum

Individual weight for the PK II pneumatic deadweight tester, providing a 0.1 PSI pressure increment; aluminum construction.

M12 x 1 Mating Cable, Female Angle x Cable, 4-Pin, 2 m

M12 x 1 mating connector cable for NOSHOK transducers and switches: female angle x cable, 4-pin, 2 m length.

Individual Weight for Type T DWT, 0.5 lb, Alloy

Individual 0.5 lb weight for Type T hydraulic deadweight tester. Produces 5 PSI on WG-89 (0.10 in²), 10 PSI on WG-90 (0.05 in²), 25 PSI on WG-91 (0.02 in²), 50 PSI on WG-92 (0.01 in²) piston/cylinder assemblies. Alloy construction.

Weight Set for PK II DWT, 1 to 20 PSI, Stainless Steel

Stainless steel weight set for PK II pneumatic deadweight tester, 1 to 20 PSI range. Contains 2× 1 PSI, 1× 2 PSI, 3× 5 PSI weights. Pairs with the PK2-20-SS range model. NIST traceable with standard or local gravity calibration.

Type T Comparator Test Gauge, 0 to 30 PSI, Monel Internals, 9/16-18 Lower Mount

0 to 30 PSI range, Monel internals, 9/16-18 lower mount, ±0.250% F.S. accuracy (standard). Replacement/additional bare gauge for Type T hydraulic comparator — no fitting or o-rings.

Pressure Switch Test Lead Kit - for Use with 7XX Pressure Controllers

Carrying Case for Type T/R Pump and Tools

Carrying case for Type T and Type R hydraulic deadweight tester pump and tools.

Union Body, 15/16-20 UNF Male x 9/16-18 UNF Female for 1424 Gauges

Union body, 15/16-20 UNF male to 9/16-18 UNF female, for connecting Type T comparator pumps to 1424-style test gauges.

1-1/2" ANSI 150# RF Flange, for PTI Transmitters

Flange only, 1-1/2" ANSI 150# raised face, for NOSHOK PTI20/PTI30 flush-diaphragm transmitters.

Model 40 Slack Diaphragm Housing Assembly, 0/4.5 to 0/8.4 in H₂O

Slack diaphragm housing assembly for the Model 40 pneumatic controller — gauge pressure, range 0/4.5 to 0/8.4 in H₂O (inches of water). Gauge version. Leak-checked only (not pre-calibrated); field calibration to the Model 40 requires factory expertise.