Family Owned & Operated Since 1971• Bakersfield, CA
SKU: CFP2-100-QI/GLD
Certifiber Pro Quad OLTS V2, w/Dbl Ended Inspect, Wi-Fi & 1YR Gld
List price. Volume pricing available.
Optical loss test set with fastest time to certify - two fibers at two wavelengths in three seconds. Check Certifiber Pro Optical Loss Test at Fluke Networks.
The Fluke Certifiber Pro Quad OLTS V2, with Double Ended Inspect, Wi-Fi & 1YR Gld # CFP2-100-QI/GLD is manufactured by Fluke. Valley Instrument Service is an authorized Fluke dealer offering full sales support, NIST-traceable calibration, and expert technical assistance.
Our team can help with product selection, specs, pricing, and application support.
Contact Us or Call (661) 327-8681| Input Connector | Interchangeable connector adapter (LC standard, SC, ST, FC, and MDC optional) |
| Detector Type | InGaAs |
| Wavelengths | 850 nm, 1300 nm, 1310 nm, 1550 nm |
| Power Measurement Range | 0 dBm to -65 dBm (850 nm) 0 dBm to -70 dBm (all other wavelengths) |
| Re-calibration Period | 1 year |
| Integrated Wi-Fi | Meets IEEE 802.11 a/b/g/n; dual band (2.4 GHz and 5 GHz) |
| Specification | CertiFiber Pro Multimode Modules |
| Testing Speeds (excludes referencing times) | Smart Remote mode: Far End Source mode: ≤ 2 seconds (2 wavelengths, one direction auto wavelength detection) Loopback mode: ≤ 2 seconds (2 wavelengths, one direction auto wavelength detection) |
| Input/Output Connectors | Interchangeable connector adapter (LC standard, SC, ST, FC, and MDC optional) |
| Launch Condition1,2 | Encircled Flux compliant to TIA-526-14-B, ISO/IEC 14763-3 and IEC 61280-4-1 |
| Fiber Types Tested | 50/125 µm or 62.5/125 µm |
| Source Type and Wavelengths | LED source 850 nm ± 30 nm 1300 nm ± 20 nm |
| Maximum Length Measurement | 12 km |
| Length Measurement Accuracy | ± 1.5 m plus ± 1 % of length |
| Output Power (Nominal) | ≥ -24 dBm with EF-TRC |
| Output Power Stability3 | ± 0.05 dB over 8 hours ± 0.03 dB over 15 minutes |
| Source Wavelengths | 850 nm, 1300 nm, 1310 nm, 1550 nm |
| Title | Requirement |
| Output Power | >-5 dBm |
| Operating Wavelength | 650 nm nominal |
| Output Modes | Continuous wave Pulsed mode (2 Hz to 3 Hz blink frequency) |
| Connector Adapter | 2.5 mm universal |
| Laser Safety | Class II CDRH Over operating temperature range |
| Operating Temperature | -10° C to 45° C |
| Storage Temperature | -10° C to +60° C |
| Operating Relative Humidity % RH without condensation | 0 % to 90 %, 32 °F to 95 °F (0° C to 35° C) 0 % to 70 %, 95 °F to 113 °F (35° C to 45° C) |
| Vibration | Random, 2 g, 5 Hz-500 Hz |
| Shock | 1 m drop test with and without module and adapters |
| Safety | CSA C22.2 No. 1010.1: 1992 EN 61010-1 1st Edition + Amendments 1, 2 |
| Pollution Degree | 2 |
| Altitude | Operating: 4,000 m; storage: 12,000 m |
| EMC | EN 61326–1 |
This product is part of a family with 3 models. Select a model below to view details.
| Model | Price | |
|---|---|---|
CFP2-100-QI/GLDCurrent | Request Quote | Viewing |
CFP2-100-QI | Request Quote | View Details → |
CFP2-100-QI-NW | Request Quote | View Details → |
087724767001 TS30/120 Angl/Pin
1 GHz DSX Cable Analyzer Modules Add on Kit
Get the Fluke BT521 Advanced Battery Analyzer with intelligent test probe set. The 500 series battery impedance tester can analyze stationary lithium ion batteries and battery banks internal battery resistance.
Get the Fluke BT521 Advanced Battery Analyzer with intelligent test probe set. The 500 series battery impedance tester can analyze stationary lithium ion batteries and battery banks internal battery resistance.