Family Owned & Operated Since 1971• Bakersfield, CA
SKU: FLK-A3003FC
The a3003 FC wirelessly relays measurements from current clamp accessories to other Fluke Connect enabled master units.
List price. Volume pricing available.
The a3003 FC wirelessly relays measurements from current clamp accessories to other Fluke Connect enabled master units.
The Fluke a3003FC Wireless 2000 amp DC Clamp Meter # FLK-A3003FC is manufactured by Fluke. Valley Instrument Service is an authorized Fluke dealer offering full sales support, NIST-traceable calibration, and expert technical assistance.
Our team can help with product selection, specs, pricing, and application support.
Contact Us or Call (661) 327-8681| General | DC Current Function |
| Range | 1.0A to 999.9 A DC1000 A to 2000 A DC |
| Resolution | 0.1 A1 A |
| Accuracy | 2% ± 5 digits2.5% ± 5 digits |
| LCD w/backlight | 3 ½ digits |
| Log rate/Interval | 1 sec minimum/adjustable by PC or front pannel |
| Battery type | 2 AANEDA 15 AIEC LR6 |
| Battery life | 120 hours |
| Memory | Record up to 65,000 readings |
| RF communications | 2.4 GHz ISM Band |
| RF communication range | Open air, unobstructed: Up to 20 mObstructed, sheetrock wall: Up to 6.5 mObstructed, concrete wall or steel electrical enclosure: Up to 3.5 m |
| Operating temperature | -10°C to +50°C |
| Storage temperature | -40°C to +60°C |
| Temperature coefficient | Add 0.1 X (specified accuracy) /°C ( 28°C) |
| Operative humidity | 90% at 35°C75% at 40°C45% at 50°C |
| Altitude | Operating 2,000 mStorage 12,000 m |
| EMC | EN 61326-1:2013 |
| Safety compliance | IEC 61010-1600 V CAT IV / 1000 V CAT III3rd edition |
| Certifications | CSA C-USCEFCC: T68-FBLEIC: 6627A-FBLE |
| Ingress Protection (IP) rating | IP42 |
| Jaw opening | 64 mm |
| Size (HxWxD) | 16.5 mm x 6.35 cm x 1.4 cm (6.5 in x 2.5 in x 1.4 in) |
| Weight | .65 kg (1.75 lb) |
Get the right HVAC multimeter for accurate temperature & microamp measurements. The Fluke 116 digital multimeter has everything you need in an HVAC meter.
The Fluke i40s-EL Current Clamp-on Transformer is used for low current measurement; suitable for making measurements up to 40A, and also measures accurately on 1A and 5A secondary current transformers.
The 80I-110s is compatible with any Fluke ScopeMeter Test Tool, Power Harmonics Analyzer, Oscilloscope, Multimeter, or other voltage measurement device that has the following features: BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter PM9081/001.
The slim and thin jaw can easily fit into tightly packed wires. The lightweight and compact design allows you to carry it around in your pocket