Family Owned & Operated Since 1971• Bakersfield, CA
SKU: BAT-200
Simple, portable universal battery tester for standard and rechargeable cells — 9V, AA, AAA, C, D, and 1.5V button type — with an easy-to-read color-coded good / low / replace display.
List price. Volume pricing available.
Battery failure is one of the most common causes of sensor and instrument failure. The Amprobe BAT-200 is a simple, portable universal battery tester that checks the charge in both standard and rechargeable cells, so you can find and swap a weak battery before it takes equipment offline.
An easy-to-read, color-coded display shows good, low, and replace/recharge status at a glance, while the compact body and ergonomic battery holder make spot-checks quick and repeatable.
The Amprobe BAT-200 Universal Battery Tester (9V, AA, AAA, C, D & 1.5V Button) # BAT-200 is manufactured by Amprobe. Valley Instrument Service is an authorized Amprobe dealer offering full sales support, NIST-traceable calibration, and expert technical assistance.
Our team can help with product selection, specs, pricing, and application support.
Contact Us or Call (661) 327-8681| 3 mΩ | 0.001 mΩ |
| 0.01 mΩ | 0.8% + 6 |
| 300 mΩ | 0.1 mΩ |
| 3000 mΩ | 1 mΩ |
| 6 V | 0.001 V |
| 60 V | 0.01 V |
| 600 V | 0.1 V |
| 1000 V | 1 V |
| VAC (45 Hz to 500 Hz with 800 Hz filter) | 600 V |
| Frequency (displayed with VAC and AAC)2 | 500 Hz |
| 600 mV | 0.1 mV |
| 6000 mV | 1 mV |
| ADC/AAC (with accessory Fluke i410) | 400 A |
| Temperature | 0°C to 60°C |
| Meter mode | 999 records for each measurement position with time stamp |
| Sequence mode | Up to 100 profiles and 100 profile templates (Each profile stores up to 450 batteries) with time stamp |
| AC voltage ripple (20 KHz Max) | 1. The measurement is based on AC injection method. The injected source signal is 2. Trigger level VAC: 10 mV, AAC: 10 A |
| Measurement Modes | BT510 |
| Resistance (mΩ) | ● |
| Battery voltage | ● |
| Voltage DC | ● |
| Voltage AC and frequency (Hz) | ● |
| Ripple volt | ● |
| DMM mode | ● |
| Discharge measurement mode | ● |
| Automatic measurement save | ● |
| Memory view | ● |
| Size (H x W x D) | 22 x 10.3 x 5.8 cm (9 x 4 x 2 in) |
| Weight | 850 g (1.9 lb) |
| Screen dimensions | 7.7 x 5.6 cm (3 x 2.2 in) |
| Interface | USB mini |
| Warranty | 3 years |
| Long angled probe (overall length) | 242.2 cm (95.38 in) |
| Short angled probe (overall length) | 216.8 cm (85.38 in) |
| Overall span (coil relaxed) | 10.1 cm (4 in) |
| Overall maximum span (coil extended) | 109.2 cm (43 in) |
| BTL20ANG probe tip angle | 20 degrees from horizontal |
| Operating temperature | 0°C to 40°C |
| Storage temperature | -20°C to 50°C |
| Lithium-ion battery charging temperature | 0°C to 40°C |
| Operating humidity | ≤ 80% RH (at 10°C to 30°C) |
| Operating altitude | Sea level to 2000 meters |
| Storage altitude | Sea level to 12,000 meters |
| IP rating | IP40 |
| Radio | FCC Class A |
| Vibration requirements | MIL-PRF-28800F: Class 2 |
| Drop test requirements | 1 meter |
| Temperature coefficients | Add 0.1 x specified accuracy for each degree C above 28°C or below 18°C |
| Safety compliance | 600 V CAT III |
| EMC | IEC 61326 |
| ROHS | China, Europe |
| Protection class 2 | Pollution Degree II |
| Battery compliance | 2 G per IEC68-2-26, 25 G, and 29 |
Accessories, replacement sensors, and parts for this product family.
| Model | Price | |
|---|---|---|
BAT-200Current | Request Quote | Viewing |
BAT-250 | Request Quote | View Details → |
BAT-500 | Request Quote | View Details → |
Ensure safe DC power measurements on PV modules.Ideal for use with solar clamp meters that accept 4mm banana plugs. Complies with CAT III 1000V / CAT IV 600V, 20A ratings.
1000A AC/DC TRMS Navigator Clamp
122 kV High Voltage Detector Combo Kit for Electricians
Compact DMM w/NCV and Logic Test