Family Owned & Operated Since 1971• Bakersfield, CA
Handheld test & measurement instruments — humidity, temperature, water quality, power, and more
19 products
The Extech MO290-RK uses combination moisture meter/thermal hygrometer to capture all ambient conditions as well as moisture levels in one meter. Includes essential probes to measure moisture levels under baseboards, in between walls, and in hard wood and plywood subfloors. Use USB Humidity/Temperature datalogger for GPP calculations.
The Extech MO290 combines a pin/pinless moisture meter with a built-in infrared thermometer, allowing you to measure temperature, humidity, dew point, vapor pressure, and much more. Comes complete with pin moisture probe, 9-Volt battery, and case.
The Extech MO290 combines a pin/pinless moisture meter with a built-in infrared thermometer, allowing you to measure temperature, humidity, dew point, vapor pressure, and much more. Comes complete with pin moisture probe, 9-Volt battery, and case.
The MO280-KW test kit is specifically designed for water damage restoration contractors who need to monitor job site conditions, progress, and insurance company reporting. The kit includes an MO280 pin less Moisture Meter, MO210 Pocket Moisture Meter, and RH490 Precision Hygro-Thermometer. Supplied in an attractive storage case that provides protection and organization for the testers whenever they are needed.
The Extech MO265 is a combination pin/pinless moisture meter that can both measure the relative moisture in wood and other building materials using pinless technology and determine percentage of moisture in sheetrock and other materials using the direct pin method. Measurements are displayed on a digital LCD with backlighting and a tri-color LED bargraph. Pinless non-invasive measurement depth to 22 mm (0.75 in) below the surface. In addition, a remote pin probe is included to measure moisture in difficult to access places. Complete with 9-Volt battery, replacement pins, remote pin probe, protective cap, and pouch case.
The Extech MO260 is a combination pin/pinless moisture meter that can both measure the relative moisture in wood and other building materials using pinless technology and determine percentage of moisture in sheetrock and other materials using the direct pin method. Measurements are displayed on a digital LCD with backlighting and a tri-color LED bargraph. Pinless non-invasive measurement depth to 22 mm (0.75 in) below the surface. Complete with 9V battery, replacement pins, protective cap, and pouch case.
The Extech MO750 Soil Moisture Meter has an integrated 8-inch heavy-duty moisture probe which monitors moisture levels in soil from 0% to 50% and easy 1-handed operation. Meter features a durable, water-resistant housing with a large LCD display, data hold to freeze the readings on the display, and minimum/maximum function. Comes with replaceable moisture probe (MO750-P), 4 AAA batteries, probe sensor cap, and user manual.
Take non-invasive, pinless moisture measurements on wood and building materials with Extech's MO257 Moisture Meter. Easy-to-operate with automatic calibration, this meter has a ball moisture sensor that provides smooth gliding on hard or delicate surfaces. A large backlit triple LCD displays moisture reading and Max and Min readings; user can also adjust two alarm levels to display a visual alert (flashing “RISK” or “WET” indicators) plus a beeper alert. The MO257 is a must-have tool for analyzing the after-effects of water leakage behind walls and in ceilings and also measuring moisture content on a non-flat surface.
The Extech MO230 Pocket Moisture Meter's large dual graphical LCD displays moisture in wood and other building materials plus air temperature and relative humidity. The analog bargraph displays moisture, minimum/maximum moisture values, and programmable wet/dry indication. Use on wood, paper, wallboard, sheet rock, cardboard, plaster, concrete, and mortar. The memory contains 3 wood groups and four building material groups with calibrations for approximately 150 species of wood and 19 building material types. The index mode has programmable high and low values to quickly locate moisture with comparative measurement. Includes replaceable threaded electrode pins, impact proof housing, auto power off which conserves battery energy, built-in battery check, and measurement verification test. Complete with protective cap, replacement pins, and three CR-2032 button batteries.
The Extech MO280 provides non-invasive moisture measurements in wood and other building materials with virtually no surface damage. With a measurement depth to 22 mm (0.75 in) below the surface, the MO280 uses electro-magnetic technology to quickly indicate the moisture content in building materials. Select from 10 wood types and measurement ranges. The LCD displays percentage of moisture in the wood or other material being tested. The MO280 also features an automatic internal test and calibration and low battery indication. Complete with 9V battery and pouch case.
The Extech MO290-HP is a Moisture Hammer Probe for select moisture meters. The hammer probe has two sharp pins for penetrating hard surfaces. The pins themselves are 4 cm (1.6 in) long. For use with select Extech moisture meters that accept external moisture probes. Comes with 4 pins.
Take pinless, non invasive moisture measurements on wood and building materials without damaging the surface with Extech’s MO57 Moisture Meter. The ball moisture sensor provides smooth gliding on hard or delicate surfaces. It is easy to operate with display icons that indicate the levels of moisture content plus an audible alert feature. The MO57 can be ideal forrestoration projects and applications where moisture detection on floors, tiles, and under carpets is critical. A must-have tool for analyzing the after effects of water leakage in walls, ceilings, and also on non flat surfaces.
The Extech MO210 Pocket Moisture Meter allows you to quickly assess whether wood and other porous materials have endured any water incursion. Simply push the sharply pointed electrode pins into the surface of sheetrock, drywall, wallboard, concrete, mortar, plaster or other building materials and the device will detect moisture levels between 0.2% to 2.4%. Slide the material-selection switch to wood and the handheld meter will determine moisture presence in timber from 6% to 44%. Complete with protective cap, replacement pins, and three CR-2032 button batteries.
Take quick moisture measurements from a range of building materials using the pin or pinless (non-invasive) method with the Extech MO55. This easy-to-operate moisture meter uses display icons to indicate moisture levels as well as offers an audible alert. It's ideal for building restoration projects and applications where moisture detection on floors, tiles, and under carpets is critical, and it's a must-have tool for analyzing the after-effects of water leakage behind walls and in ceilings.
The Extech MO290 is a Moisture Baseboard Probe for Extech moisture meters. Dual fixed flat pins are 10.5 cm (4.1 in) long. Complete with a 76.2 cm (30 in) cable and RJ45 connector. For use with MO290, MO295, MO297 and MO300 moisture meters.
The Extech MO290-EP is an Extension Moisture Probe with dual sharp pins. The pins measure 8.5 cm (3.4 in) long, and a cable length of 76 cm (30 in). Moisture Probe can be used with MO290-EXT Moisture Probe Extenders to increase the working distance of the probe up to 58cm (23 in) when 2 extenders are combined together.
The Extech MO50 is a compact pin moisture meter that can display moisture levels in wood and building materials including wall board, sheetrock, concrete, and mortar. With an audible alert that beeps faster as moisture levels increase, this compact meter is easy to use and understand. The MO50 complete with pins (installed on meter), protective cap, and 9V battery.
The Extech MO290 combines a pin/pinless moisture meter with a built-in infrared thermometer, allowing you to measure temperature, humidity, dew point, vapor pressure, and much more. Comes complete with pin moisture probe, 9-Volt battery, and case.
The Extech MO200-PINS are a set of Moisture Meter Replacement Pins. This product is for use with the MO210, MO260, and MO265 moisture meters and is field replaceable. It comes with fifty durable pins.
Our team is factory-trained and ready to help you select, configure, and maintain Extech instruments.
Get Expert Help