Family Owned & Operated Since 1971• Bakersfield, CA
Process Measurement Technology — Model 40 pneumatic transmitters and controllers, electronic pressure transmitters (88C/88F/831/851), transducers (ACT/DCT/SPT/IDT), and submersible level transmitters.
5 products across 5 product families
Cost-effective submersible level transmitter for tanks, wells, and wastewater. 4–20 mA or 1–5 VDC output, ranges 0–6 to 0–300 PSI (to ~692 ft of water), 316L stainless steel diaphragm, a Delrin or stainless snubnose or flush sensing port, and vented polyurethane cable with a Viton seal. Cable length is specified separately. Configure sensing port, output, range, and electrical connection.
Submersible pressure transmitter for liquid-level measurement in tanks, wells, sumps, and wastewater. 12–28 VDC / 4–20 mA output, ranges 0–6 to 0–300 PSI (to ~692 ft of water), with a choice of snubnose, stainless snubnose, or protected flush-cage sensing port; 316 stainless steel or Hastelloy C diaphragm; and polyurethane or Teflon cable. NSF-certified and CSA intrinsically safe versions available. Cable length is specified separately. Configure sensing port, range, electrical connection, diaphragm, and fill.
Shark Cage submersible level transmitter — a rugged flush-diaphragm sensor inside a protective cage for debris-laden or high-flow service such as lift stations, storm water, and industrial sumps. CSA intrinsically safe. 12–28 VDC / 4–20 mA output, ranges 0–6 to 0–60 PSI, 316 stainless steel diaphragm, and vented polyurethane or Teflon cable. Cable length is specified separately. Configure pressure range and electrical connection.
Low-cost submersible level transducer for OEM and general level measurement. Wide choice of 4–20 mA or VDC outputs (including ratiometric), ranges 0–1 to 0–150 PSI, 316L stainless steel diaphragm, a Delrin or stainless snubnose, and vented polyurethane, polyolefin, or Teflon cable with a Viton seal. Optional on-board temperature output. Cable length is specified separately. Configure sensing port, output, range, electrical connection, and temperature option.
Slim-line submersible level transmitter — a narrow 0.75 in body for 1 in wells, piezometers, and tight boreholes. 11–30 VDC / 4–20 mA output, ranges 0–15 to 0–150 PSI (to ~346 ft of water), 316L stainless steel diaphragm, Delrin snubnose, and vented polyurethane cable with a Viton grommet. Cable length is specified separately. Select the pressure range; the remaining configuration is standard.
Our team is factory-trained and ready to help you select, configure, and maintain Ametek PMT instruments.
Get Expert Help