Family Owned & Operated Since 1971• Bakersfield, CA
Process Measurement Technology — Model 40 pneumatic transmitters and controllers, electronic pressure transmitters (88C/88F/831/851), transducers (ACT/DCT/SPT/IDT), and submersible level transmitters.
5 products across 5 product families
All-welded 316 stainless steel fixed-range pressure transmitter — durable, accurate, and cost-effective for tough environmental and corrosive-media service. 4–20 mA (or low-power 1–5 VDC) output, ±0.3% full scale (±0.5% on the differential version). Gauge, absolute, compound, vacuum, or differential, from 6 PSI to 5000 PSI (6–500 psid differential). Weatherproof against direct spray to 200 PSI. Configure connection, type, range, output, fill, and cable to build your part number.
FM and CSA explosion-proof and intrinsically safe pressure transmitter with a bench-adjustable 5:1 zero/span turndown and a double-O-ring, clean-in-place weatherproof design. 4–20 mA output, ±0.25% of calibrated span, 316 stainless steel construction (Hastelloy C flush diaphragm for viscous or solids-bearing media), NACE-compliant. Ranges 3 PSI to 5000 PSI. Used in refineries, pipelines, petrochemical plants, pulp & paper, and water/wastewater. Configure connection, type, range, output, diaphragm, fill, approval, and coupling.
Welded 316 stainless steel hazardous-location pressure transmitter with a 4–20 mA output and ±0.25% of calibrated span accuracy (linearity, hysteresis, repeatability). FM and CSA explosion-proof and intrinsically safe, NACE-compliant, with a 5:1 field-adjustable zero/span turndown. Calibrated range bands from 3 PSI to 5000 PSI. Configure range band, wetted material, and output to build your part number.
Flush-mount hazardous-location pressure transmitter — the diaphragm sits flush with the process connection to prevent particulate buildup, making it suited to viscous or solids-bearing media. 316 stainless steel housing with a Hastelloy C diaphragm, 4–20 mA output, ±0.25% of calibrated span. FM and CSA explosion-proof and intrinsically safe. Calibrated range bands from 3 PSI to 300 PSI. Configure range, fill material, agency approval, and coupling.
Compact intrinsically safe pressure transmitter for hazardous-area measurement — chemical and petrochemical manufacturing, control skids, and oil & gas wellheads. Stainless steel isolation diaphragm (Monel or Hastelloy optional) in a 316 stainless steel housing, ±0.2% FS (BFSL) typical, with a wide choice of 4–20 mA or VDC outputs. FM (US/Canada), ATEX (Dekra), and IECEx approved. Ranges from 0–1 PSI to 0–5000 PSI (0–0.07 to 0–340 bar). Configure protection, output, connection, and pressure to build your part number.
Our team is factory-trained and ready to help you select, configure, and maintain Ametek PMT instruments.
Get Expert Help