Family Owned & Operated Since 1971• Bakersfield, CA
Mansfield & Green primary pressure standards — Type T hydraulic and PK II pneumatic deadweight testers, Type T comparators, and T-series handpumps.
10 products
Top-of-line imperial Type T hydraulic deadweight tester at ±0.015% reading accuracy. Dual-column configuration with two interchangeable pistons (low + high range) and a dedicated weight set per piston, so high-range and low-range work proceed without reconfiguration. NIST traceable, local gravity correction + calibration data included. Configure pressure range, pressure medium, and o-ring material to build your part number.
Top-of-line metric Type T hydraulic deadweight tester at ±0.015% reading accuracy. Dual-column configuration with two interchangeable pistons (low + high range) and a dedicated weight set per piston so high-range and low-range work proceed without reconfiguration. NIST traceable, local gravity correction + calibration data included. Configure pressure range, pressure medium, and o-ring material to build your part number.
Metric single-column, single-piston/cylinder hydraulic deadweight tester at ±0.015% reading accuracy — highest accuracy class in the metric Type T DWT line. NIST traceable, local gravity correction + calibration data included. 18 range models (6 ranges × 3 unit systems: kg/cm², bar, kPa). Configure pressure range, pressure medium, and o-ring material to build your part number.
Metric dual-column, dual piston/cylinder hydraulic deadweight tester. Side-by-side columns enable comparative calibrations and differential measurements. ±0.100% standard accuracy (±0.025% optional via calibration upgrade). NIST traceable. 9 range models across kg/cm², bar, and kPa unit systems. Configure pressure range, calibration data, pressure medium, and o-ring material to build your part number.
Metric single-column, single-piston/cylinder hydraulic deadweight tester at ±0.025% reading accuracy (standard). NIST traceable with full calibration data included in the base price. 20 range models across kg/cm², bar, and kPa unit systems, spanning 1 to 100,000 kPa (or equivalent in other units). Configure pressure range, gravity correction, pressure medium, and o-ring material to build your part number.
Imperial dual-column, dual piston/cylinder hydraulic deadweight tester. Side-by-side columns enable comparative calibrations and differential measurements; each model ships with both a low-range and a high-range piston up to 15,000 PSI. ±0.100% standard accuracy (±0.025% optional), NIST traceable. Configure pressure range, calibration data, pressure medium, and o-ring material to build your part number.
Metric single-column, dual piston/cylinder hydraulic deadweight tester. ±0.100% standard accuracy (±0.025% optional via calibration upgrade). Each model ships with two interchangeable pistons — a low-range and a high-range — so one tester covers a wide pressure span. NIST traceable. 9 range models across kg/cm², bar, and kPa unit systems. Configure pressure range, calibration data, pressure medium, and o-ring material to build your part number.
Imperial single-column, single-piston/cylinder hydraulic deadweight tester at ±0.015% reading accuracy — the highest accuracy class in the M&G imperial Type T DWT line. NIST traceable, local gravity correction + calibration data included. Available in five pressure ranges from 500 PSI to 15,000 PSI. Configure pressure range, pressure medium, and o-ring material to build your part number.
Imperial single-column, dual piston/cylinder hydraulic deadweight tester for pressure calibration up to 15,000 PSI. Each model ships with two interchangeable pistons — a low-range piston for fine resolution and a high-range piston for top-pressure work. ±0.100% standard accuracy (±0.025% optional), NIST traceable. Configure pressure range, calibration data, pressure medium, and o-ring material to build your part number.
Imperial single-column, single-piston/cylinder hydraulic deadweight tester for pressure calibration up to 15,000 PSI. ±0.100% standard accuracy (±0.025% optional), NIST traceable. Configure pressure range, calibration data, pressure medium, and o-ring material to build your part number.
Our team is factory-trained and ready to help you select, configure, and maintain Ametek M&G instruments.
Get Expert Help